Select your default regional edition of MiningWeekly.com
Note: When you select a default region you will be directed to the MiningWeekly.com home page of your choice whenever you visit miningweekly.com. This setting is controlled by cookies and should your cookies be re-set you will then be directed to the regional edition associated with the geographic location of our IP address. Should your cookies be reset then you may again use the drop-down menu to select a default region.
Click on the button below to clear your default MiningWeekly.com regional edition
Note: When you clear your default region you will be directed to the MiningWeekly.com home page regional edition associated with the geographic location of our IP address.
Note: Search is limited to the most recent 250 articles. To access earlier articles, click Advanced Search and set an earlier date range. To search for a term containing the '&' symbol, click Advanced Search and use the 'search headings' and/or 'in first paragraph' options.
Please enter the email address that you used to subscribe on Mining Weekly. Your password will be sent to this address.
separate emails by commas, maximum limit of 4 addresses
BME’s AXXIS Silver debuts at sub-zero Lesotho mine
Embed VideoPopup VideoInstagram
9th September 2022 By: Tasneem Bulbulia Creamer Media Reporter
ARTICLE ENQUIRY SAVE THIS ARTICLE EMAIL THIS ARTICLE
In the mountain kingdom of Lesotho, explosives and blasting specialist BME recently achieved the first blast outside of South Africa with its new AXXIS Silver electronic initiation system.
BME – a member company of JSE-listed Omnia Group – is assisting a diamond mining customer to conduct quality blasts in all weather conditions.
BME AXXIS support manager Hennie du Preez says BME has been active on this mine since 2016.
Located at an altitude of over 3 000 m, the operation frequently experiences snow and sub-zero temperatures.
“This means blasting under challenging conditions, including extreme cold, snow and ice.
“BME provides everything from the emulsion explosive to the detonation equipment, which all continues to function well under these conditions,” Du Preez points out.
The AXXIS Silver initiation system employed at the mine is noted to be a leaner version of BME’s flagship product AXXIS Titanium.
The company conducts the priming, logging and firing of the blasts and ensures a regular supply of emulsions to the site.
“Among the benefits of AXXIS Silver is its thin, copper-cladded downline wire, which de-coils easily for use in small diameter holes – even when they are waterlogged. Due to their robust quality, our electronic detonators were able to remain in the holes for two days before blasting, in temperatures below zero where the hole collars froze solid,” says Du Preez.
Despite the conditions, there were no issues encountered with the wire or the connector.
BME’s latest logger, the TDC 600, also performed as normal in these cold and wet conditions, with no signs of screen lagging. Its battery lasted the entire duration of the logging and the firing of the blast.
“We kept our blasting boxes in the vehicle until blasting time, and they switched on without any problems. Neither did the cold conditions cause any sluggishness of the screens,” Du Preez says.
He confirms that firing the blast went ahead as planned, with smooth communication between the logger and the blasting boxes. In the final communication check, there was no instability detected.
“This was another confirmation of the resilience of our system in cold climates and freezing weather. We have had AXXIS successfully tested in the US for operating in temperatures below -40 °C, in anticipation of growing business opportunities in the US and Canada,” he outlines.
AXXIS Silver allows up to 1 800 holes to be detonated in a single blast, initiated from two blast boxes linked. Du Preez mentions that mines are increasingly asking for larger blasts to reduce downtime from pit stoppages during blasting.
BME is expecting to apply AXXIS Titanium in the Lesotho operation, which can raise the number of detonators in a single blast to 20 000 – or 20 blast boxes firing up to 1 000 detonators each.
An added benefit of the copper-cladded wire, notes Du Preez, is that the steel wire responds to a magnetic field.
After a blast, this allows remnants of wire in the blasted material to be removed by magnetic separators on the conveyor belts before entering the crushing and milling phases. It thus prevents potential damage to comminution equipment and contamination of mined material.
BME has also been supplying various Lesotho mines with up to 500 t of emulsion explosive each month, as the mining operation has expanded over time. This involves the monthly movement of over 15 tankers through steep mountain passes to keep the mine supplied with fresh emulsion. A three-day stock of BME’s double-salt emulsion is kept on the mine.
Edited by: Chanel de Bruyn Creamer Media Senior Deputy Editor Online EMAIL THIS ARTICLE SAVE THIS ARTICLE ARTICLE ENQUIRY
To subscribe email subscriptions@creamermedia.co.za or click here To advertise email advertising@creamermedia.co.za or click here
Mining Weekly is a product of Creamer Media. www.creamermedia.co.za
Other Creamer Media Products include: Engineering NewsResearch Channel Africa Polity
Sign up for our FREE daily email newsletter Receive daily sector news alerts
We offer a variety of subscriptions to our Magazine, Website, PDF Reports and our photo library.
Subscriptions are available via the Creamer Media Store.
Advertising on MiningWeekly.com is an effective way to build and consolidate a company's profile among clients and prospective clients. Email advertising@creamermedia.co.za